Proportional Integral Electric Control Valve

OMAT Proportional Integral Electric Control ValveOverview

The Oumat proportional integral electric control valve QS series valve actuator is a built-in 24V/AC bidirectional reversible motor linear actuator. It can accept and feedback 0-10V or 4-20mA control signals. When used in conjunction with the KT/KTF series valve bodies, it provides proportional control to regulate the flow of medium in pipelines. It is widely used in air conditioning, heating, and other systems, and can also be paired with other valves through different connectors. The actuator must be installed vertically on the valve body and should not be mounted below it. Sufficient space must be reserved for routine maintenance.

OMAT Proportional Integral Electric Control ValveFeatures

★ Actuator features die-cast aluminum bracket and plastic housing, compact size, lightweight
★ Equipped with permanent magnet synchronous motor and hysteresis clutch mechanism for reliable self-protection
★ Compatible with multiple control signals: incremental (floating), voltage (0～10V), current (4～20mA)
★ Optional 0～10V or 4～20mA feedback signal
★ Metal transmission gears greatly extend the actuator's service life
★ Low power consumption, high output torque, low noise
★ Easy on-site installation
★ Valve body available in threaded or flanged connections for convenient installation, compliant with IEC international standards
★ Valve body materials include cast copper, cast iron, cast steel, and stainless steel to suit different working media and temperature requirements
★ Valve configurations: two-way valve (single seat), two-way balanced valve (balanced type), three-way mixing valve, and three-way diverting valve

The electric proportional control valve operates by adjusting the valve opening angle to control the degree of opening and cross-sectional area. During the motor's rotation, linear resistance values are continuously fed back to the control unit. The control unit compares and judges based on the measured value and the feedback resistance from the electric control valve, issuing control signals to reach the target position and stopping immediately upon arrival.

OMAT Proportional Integral Electric Control ValveDetailed Parameters

Diameter DN15～300mm

Pressure PN10～PN420

Operating Temperature -30～+425℃

Suitable Media Cold/hot water, steam, glycol

Connection Type Flanged or welded

Valve Body Material Brass, WCB, 304, 316

Valve Disc Material 304, 316, PTFE-lined

Sealing Material PTFE, 304, 316

Flow Direction Unidirectional

Application Regulation

Actuation Type Electric

Type Straight-through